• blok mositure vapor barrier part. B blok moisture vapor barrier

    • MOISTURE VAPOR BARRIER     • EPOXY RESIN
    BLOK is a one-coat system which consists of a unique combination of epoxy resins and other chemical substances 2 parts A and 1 part B. It is specifically formulated to overcome the inferior adhesion properties of most resin-based systems when curing in an environment of constant wetness, extreme alkalinity (pH 13:14) and water vapor drive.

    • CONTAINER: 1 GALLON
    • WEIGHT: 9 LB
    • COVERAGE: 150-200 SQF/GAL

  • boltex clear high perfomance epoxy part. B boltex clear high perfomance epoxy

    • 100% SOLID EPOXY      • TWO COMPONENTS     • HIGH PERFORMANCE EPOXY                                  • CHEMICAL RESISTANT PROPERTIES
    BOLTEX is a 100% solid, USDA accepted, water-clear epoxy flooring resin designed for decorative colored quartz, decorative broadcast flake, metallic epoxy and a binder for mortar floors and as a primer/sealer for concrete. BOLTEX can also be used as a primer, body coat and sealer for walls.

    • CONTAINER: 2 GALLON (PART. A) / 1 GALLON (PART. B)
    • WEIGHT: 18 LB / 9 LB
    • COVERAGE: 80 SQF/GAL

  • boltex metallic solid epoxy part. B boltex metallic solid epoxy

    • 100% SOLID EPOXY     • TWO COMPONENTS
    BOLTEX is a 100% solid, USDA accepted, water clear epoxy flooring resin designed for decorative colored quartz, decorative broadcast flake, metallic epoxy. BOLTEX is the most advanced cyclo aliphatic amine curing system of its kind.  In addition, it is also resistant to fungus, mildew.

    • CONTAINER: 2 GALLON (PART. A) / 1 GALLON (PART. B)
    • WEIGHT: 18 LB / 9 LB
    • COVERAGE: 80 SQF/GAL

  • bondex epoxy primer part. B bondex epoxy primer

    • SURFACE TOLERANT EPOXY PRIMER
    BONDEX is a polyamine sealer designed to strengthen, and seal porous surfaces and as a sealer/primer for prepared concrete surfaces. On steel surfaces it is recommended for areas where, due to restrictions or economics, blasting or thorough hand preparation is not feasible.

    • CONTAINER: 1 GALLON
    • WEIGHT: 9 LB
    • COVERAGE: 250-300 SQF/GAL

  • • DECORATIVE EPOXY MORTAR     • WATER BASE COMPOUND
    CEMENTINA is a single component, ready to use water base decorative epoxy mortar. Easily applied by hand trowel, sprayer or roller. It has used us a base for EZ Dye and EZ Solid Color.

    • CONTAINER: 2 GALLON
    • WEIGHT: 21 LB
    • COVERAGE: TROWEL Approx. 200-250 SQF/GAL – SPRAYER Approx. 200-250 SQF/GAL

  • • SPECTRUM DYE
    EZ DYE is a one component, low VOC spectrum color coating. Can be used in interior/exterior, vertical/horizontal surfaces. Its formula was created with high-performance that provide a natural stone or polished concrete design on properly prepared surfaces with CEMENTINA epoxy mortar.

    • CONTAINER: 1 GALLON
    • WEIGHT: 9 LB
    • COVERAGE: 400 – 800 SQF/GAL

  • • SOLID COLOR MODIFIED     • ACRYLIC RESIN     • SINGLE COMPONENT
    EZ STAIN SOLID COLOR is a 100% modified acrylic resin, one component, low VOC floor coating system. Can be used in interior/exterior, vertical/horizontal surfaces. Its formula was created with high-performance that form a strong long lasting, even film on properly prepared surfaces with CEMENTINA epoxy mortar.

    • CONTAINER: 1 GALLON
    • WEIGHT: 9 LB
    • COVERAGE: 450-500 SQF/GAL

  • fastex fast cure polyurea part.B fastex fast cure polyurea

    • 98% SOLIDS FAST CURE POLYUREA

    FASTEX is a two component, 98% solids, VOC Compliant Polyurea that was developed as a topcoat for a use in areas that need fast cure (2-4 hour). This coating provides exceptional adhesion to a large number of substrates and performs well in a wide range of temperatures and climate conditions.

    • CONTAINER: 1 GALLON (PART. A) / 2 GALLON (PART. B)
    • WEIGHT: 9 LB (PART. A) / 18 LB (PART. B)
    • COVERAGE: 150-200 SQF/GAL

  • • 100% URETHANE     • ANTI-CRACK AND SOUND REDUCTION MEMBRANE
    FLEX is 100% solid urethane, flexible anti-crack membrane up to 1/4″,  designed to provide comfort and sound reduction. This product provides excellent chemical resistance against chipping, gouging, cracking, and can be applied to any new or restored concrete surface.

    • CONTAINER: 1 GALLON (PART. A) / 1/4 GALLON (PART.B
    • WEIGHT: 7.75 LB (PART.A) / 1.25 LB (PART.B)
    • COVERAGE: 110 SQ FT/GAL (PART.A) / 18 SQ FT/GAL (PART.B)

  • • TWO COMPONENT

    JOINT FLEX is a two component, 100% solids, VOC Compliant, self leveling flexible control and expansion joint filler.  This product cures rapidly and consistently at temperatures ranging from -20°-120°F.  With a tack-free time of under 5 minutes, JOINT FLEX reduces downtime and allows repaired areas to be reopened to vehicle or foot traffic in one hour.

    CONTAINER: WEIGHT: COVERAGE:

  • • MATTE ACRYLIC FINISH     • MIX WELL BEFORE USING
    LUSTER is designed to work on a wide variety of substrates and in many different maintenance methods. It performs exceptional well on POLICRETE floor, linoleum, decorative vinyl and stone surfaces.

    • CONTAINER: 1 GALLON
    • WEIGHT: 9 LB
    • COVERAGE: 1500 SQF/GAL

  • • ANTI-CRACKING MEMBRANE BASE MORTAR     • WATER BASE COMPOUND
    MALTA COARSE is a premixed, epoxy-rubber mortar, quick-drying crack-isolation membrane for POLICRETE Floor installation over concrete, porcelain, ceramic tile, natural stone and wood. MALTA COARSE to can be used in residential and commercial interior and exterior environments.

    • CONTAINER: 2 GALLON
    • WEIGHT: 18 LB
    • COVERAGE: 40-60 SQF/GAL

Go to Top