ENJOY THE MOST APPRECIATED FLOORS ON THE MARKET WITH THE POLISHED CONCRETE LOOK
POLISHED CONCRETE LOOK
Policrete Polished Concrete Look is a microtopping epoxy resin protected with clear liquid porcelain sealer ultra resistant, based on a multilayer system, that is used for flooring installation, walls and other surfaces coverage. It has a high resistance and long durability compared to other coatings on the market.
Policrete Polished Concrete Look is the best coating for floor installation and wall covering on the market because of its high resistance. It is commonly used in warehouses, parking lots, shops, hotels, restaurants, schools, airports, hospitals, offices, residences and buildings due to its high resistance to traffic, durability, economical maintenance and most importantly, Policrete covers your old tiles without demolition!
This decorative coating offers a variety of modern and avant-garde colors and finishes with a minimalist and industrial style, ideal for shops, industries and homes.
CATALOG
LIVING – Polished Concrete Style and Colors
DINNING – Polished Concrete Style and Colors
KITCHEN – Polished Concrete Style and Colors
BEDROOM – Polished Concrete Style and Colors
BATHROOM – Polished Concrete Style and Colors
ENTRANCE – Polished Concrete Style and Colors
GARAGE – Polished Concrete Style and Colors
BUSINESS – Polished Concrete Style and Colors
INDUSTRIAL – Polished Concrete Style and Colors
COLOR CHART POLISHED CONCRETE LOOK
* Colors are simulated. It is highly recommended that you do a sample before installation.
SYSTEM POLISHED CONCRETE LOOK
Polished Concrete Look consists of three steps or layers after the preparation, leveling or repair of existing surfaces: PRIMER, DECORATIVE COAT AND PROTECTIVE COAT; it results in a floor with a finish that is equal to polished concrete but with greater resistance to deterioration and durability.
This system is applied directly to any surface, such as tiles, stone, concrete, etc.
| System Table | ||||||
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | |
| PRISMA T-1 Coat | ✖ | |||||
| BLOK + SILICA SAND – 1 Coat | ✖ | ✖ | ✖ | |||
| BONDEX + SILICA SAND – 1 Coat | ✖ | ✖ | ||||
| ULTRAPLAN 1/4″ | ✖ | ✖ | ✖ | ✖ | ||
| FLEX 300 1/8″ Crack – 1 Coat | ✖ | |||||
| FLEX 100 1/16″ Crack- 1 Coat | ✖ | ✖ | ||||
| BONDEX + SILICA SAND – 1 Coat | ✖ | ✖ | ✖ | ✖ | ||
| CEMENTINA SPRAY – 1 Coat | ✖ | ✖ | ✖ | ✖ | ✖ | ✖ |
| EZ DYE – 1 Coat | ✖ | ✖ | ✖ | ✖ | ✖ | ✖ |
| BOLTEX CLEAR – 1 Coat | ✖ | ✖ | ✖ | |||
| ULTRASEAL – 2 Coats | ✖ | ✖ | ✖ | ✖ | ✖ | ✖ |
System 1 – Over concrete. This system included moisture control, 1/4″ leveling, anti-cracking membrane up to 1/8″ and extra impact resistance.
System 2 – Over concrete and natural stone. This system included moisture control, 1/4″ leveling, anti-cracking membrane 1/16″ and extra impact resistance.
System 3 – Over tile. This system included 1/4″ leveling, anti-cracking membrane up to 1/16″ and extra impact resistance.
System 4 – Over tile. This system included 1/4″ leveling.
System 5 – Over concrete. This is a 1/8″ system with moisture control.
System 6 – Over concrete. This is a basic system used when no require moisture control, anti-cracking membrane and extra impact resistance.
